570Z (3P) Models with 7.5 cm Pop-Up Height SPRINKLER BODY ONLY

Are ideal for small gardens and green areas. 7 distinct pop-up nozzle holders and a large number of interchangeable nozzles offer users a wide choice.

Features

• The sealing device allows the turret to be extended without water loss: this enables faster system setup and the use of more nozzles in the same sector with the same nominal flow rate.

• The seal is ensured at a pressure of 1 bar.

• The flushing, which occurs during retraction, expels debris, ensuring constant cleaning of the turret.

• Compatible with all Toro 570 Series nozzles – including 570 MRP Plus, TVAN, Stream Bubblers, and low-trajectory nozzles.

• All bodies are shipped with a pre-installed flush cap for easy cleaning and sprinkler extraction.

• The collar allows easy adjustment of the working angle during testing.

Additional Functions

• The small diameter collar, only 50 mm, is barely visible: this reduces damage from obstruction or vandalism.

• Compatible with Maxijet® nozzles for micro-irrigation applications.

• Models with check valve, equipped with a strong return spring to eliminate the problem of drainage at low pressures, retaining water in the piping (optional).

• Durable Cycolac construction.

• Stainless steel return spring.

Technical Specifications

• Sprinkler spacing: 0.6-5.5 m

• Flow rate range: 0.2-17 l/m

• Recommended operating pressure: 1.4-3.5 bar

• Maximum pressure: 5.2 bar

• ½" female threaded inlet connection.

• ½" female threaded side connection (for 6SI and 12SI versions).

• The Check-O-Matic check valve (optional) retains pressure from a maximum height difference of 3 m.

Dimensions:

• Body diameter:

• Collar diameter: 50 mm