courses

How to correctly measure flow rate for your irrigation system

I will share with you a simple and economical method on how to measure the "dynamic" flow rate of your water source to be able to build or provide the correct information for setting up your irrigation system.

• Testing advice you should follow if you have 1/2″ static sprinklers (e.g., 570, 1804, LPS, UniSpray, PSU) at the pressures indicated in the lesson.
• Testing advice you should follow if you have 1/2″ MINI dynamic sprinklers (e.g., Mini8, SRM, 3504, PGJ.) at the pressures indicated in the lesson.
• Testing advice you should follow if you have 3/4″ dynamic sprinklers (e.g., T5, 5004, PGP, ProPlus.) at the pressures indicated in the lesson.

With this data, you will have certainty about the flow rates and from here you can start your project on solid foundations.

Then follow the other courses to continue with your project.

Any doubts? Contact us directly via email or request a virtual appointment .

How to professionally install your My4garden irrigation kit

You have received a quote from my4garden.com and accepted it.

Great! You've taken the first step, but you need a little help with its assembly…

HERE WE ARE!

The DIY mindset, even for your garden, with our guide will simplify the assembly procedure with examples and tips.

Our courses are born from over 46 years of experience in the sector, including design, construction, testing, case studies, improvements, and even some mistakes... it happens!

This course aims to be a guide to make your work easier!

In this course, there are various lessons that give you instructions on how to approach and proceed with the execution/installation of your irrigation system based on an executive project and a material kit provided by my4garden.com , but you can use it as a general approach.

To proceed, you must have a project already correctly prepared ( also see our design services ) or through the irrigation kits from My4garden.com which offers customers of the site discounts and a turnkey package.

The package consists of:

• Executive project with material preparation by zone.
• Detailed indication of excavations and pipe diameters.
• Indication of the position and type of sprinklers with their specific identification for placement.
• Discount Coupon Code for purchases on the my4garden.com website.
• Includes explanatory Videos.
• There will be electronic sheets in .pdf and images.
• Practical preparation examples.

The objective of the course is:

• To independently make hydraulic connections with practical examples of images and videos.
• To independently assemble the manifold and the electrical part of the solenoid valves with descriptions and example images.
• To be able to generally program control units.
• To share general tips for optimizing work.
• To consult with the speaker via video appointment or via email .

UNDER UPDATE

Personalized BASE Design Course 1:1 for irrigation systems

The First steps to independence is the Project

This is a dynamic course, meaning it has a structure but is adaptable to the needs of the applicant.

It is purchased as a package of 4+1 lessons of 90 minutes each, for a total of 6 hours, and then can be continued as needed with additional hours (to be purchased separately).

• 4 lessons of approximately 90 minutes each with Google MEET.
• 1 extra thematic lesson, also 90 minutes, with Google MEET.
• Documentation in .pdf for technical specifications of pipes, sprinklers, and various components.
• Example .dwg layout with screen sharing or a .dwg layout provided by the client.

Course Objective:

• Project evaluation dynamics.
• Using multiple brands by leveraging their various technical attributes to achieve the best result.
• Zone division based on water source, geographical location, and the reasoning behind it.
• Practical exercises for home in electronic or paper format (with compass and ruler).
• Includes 4+1 hours of private 1-on-1 lessons.

Course Pre-requisite:

• Best option: computer with a minimum 2D CAD program like Nanocad, Extracad, Autocad, etc. The important thing is that it reads .dwg or .dxf files.
• Best option: basic knowledge of 2D CAD programs, lines, circles, polylines, etc.
• In case of lack of availability or knowledge of software, the use of a compass and ruler for paper design is required.
• Web-Cam and an account to use Google MEET for the course or an alternative (if without such an account).
• Ability to print drawings shared via web in A4 or A3 format (Black/White).

Lessons are scheduled via electronic calendar

UNDER UPDATE

Course to create a personalized irrigation system 1:1

Do you want to be autonomous in creating your irrigation system?

1-to-1 training course schedulable via electronic calendar.

This is a dynamic course, meaning it is structured based on the applicant's level of knowledge.

It is purchased as a package of 6+1 lessons of 90 minutes each, for a total of 6 hours, and then can be continued as needed with additional hours (to be purchased separately).

The course is individual and consists of/provided by:

• 6 lessons of approximately 90 minutes each with Google MEET.
• 1 extra thematic lesson, also 90 minutes, with Google Meet.
• Layout from the client or an example to be processed with an irrigation scheme prepared by us.

Course Objective:

• Explanation of material usage to achieve the best result.
• Logics for zone division based on water source and geographical location.
• Excavation planning, recommended techniques and equipment.
• Material laying planning.
• Explanation of the most commonly used methods and techniques for installation.
• Testing procedure.
• General adjustment and programming.

Course Pre-requisite:

• Web-Cam and an account to use Google MEET for the course or an alternative (if without such an account).

Lessons are scheduled via electronic calendar

UNDER UPDATE