570Z (3 P) models with 7.5 cm pop-up ONLY BODY
They are ideal for small gardens and green areas. 7 distinct pop-up nozzle holders and a large number of interchangeable nozzles offer users a wide choice.
Features
• The sealing device allows the turret to be ejected without water loss: this allows for a faster system start-up and the use of more nozzles in the same sector with the same nominal flow rate.
• The seal is guaranteed already at a pressure of 1 bar. • The wash, which takes place during retraction, expels debris ensuring constant cleaning of the turret. • Can be coupled to all Toro 570 Series nozzles – including 570 MRP Plus, TVAN, Stream Bubblers and low trajectory nozzles • All bodies are shipped with a pre-installed flush cap for easy cleaning and extraction of the sprinkler • The bezel allows easy adjustment of the working angle during testing
Additional functions
• The small diameter bezel, only 50 mm, is not very visible: this reduces damage from clutter or vandalism • Can be coupled to Maxijet® nozzles for micro-irrigation applications • Models with check valve, equipped with a strong return spring to eliminate the problem of drainage at low pressures, retaining water in the pipe (optional) • Durable Cycolac construction • Stainless steel return spring
Technical specifications
• Distance between sprinklers: 0.6-5.5 m • Flow range: 0.2-17 l/m • Recommended operating pressure: 1.4-3.5 bar • Maximum pressure: 5.2 bar • ½" female threaded connection to the network • ½" female threaded side connection (for 6SI and 12SI versions) • The Check-O-Matic check valve (optional) retains the pressure originated by a maximum height difference of 3 m.
Dimensions:
• Body diameter: • Bezel diameter: 50 mm
