570Z (2 P) models with 5 cm riser ONLY BODY

They are ideal for small gardens and green areas. 7 distinct pop-up nozzle holders and a large number of interchangeable nozzles offer users a wide choice.

Features

• The sealing device allows the turret to be extended without water loss: this allows the system to reach operating speed more quickly and to use more nozzles in the same sector with the same nominal flow rate.

• Sealing is ensured at a pressure of 1 bar.

• The flushing, which takes place during retraction, expels debris ensuring constant cleaning of the turret.

• Compatible with all Toro 570 Series nozzles – including 570 MRP Plus, TVAN, Stream Bubblers and low trajectory nozzles

• All bodies are shipped with a pre-installed flush cap for easy cleaning and removal of the sprinkler

• The bezel allows easy adjustment of the working angle during testing

Additional features

• The small diameter bezel, only 50 mm, is barely visible: this reduces damage from bulk or vandalism

• Can be combined with Maxijet® nozzles for micro-irrigation applications

• Models with check valve, equipped with a resistant return spring to eliminate the problem of drainage at low pressures, retaining water in the pipeline (optional)

• Durable Cycolac construction

• Stainless steel return spring

Technical specifications

• Distance between sprinklers: 0.6-5.5 m

• Flow rate range: 0.2-17 l/m

• Recommended operating pressure: 1.4-3.5 bar

• Maximum pressure: 5.2 bar

• ½" female threaded connection to the mains

• ½" female threaded side connection (for 6SI and 12SI versions)

• The Check-O-Matic check valve (optional) retains the pressure originated by a maximum difference in height of 3 m.

Dimensions:

• Body diameter:

• Bezel diameter: 50 mm