570Z Models (2 P) with 5 cm turret rise BODY ONLY
They are ideal for small gardens and green areas. 7 distinct pop-up nozzle holders and a large number of interchangeable nozzles offer users a wide choice.
Features
• The sealing device allows the turret to be ejected without water loss: this allows faster system start-up and the use of more nozzles in the same sector with the same nominal flow rate. • The seal is ensured even at a pressure of 1 bar. • The flushing, which takes place during the retraction phase, expels debris, ensuring constant cleaning of the turret. • Compatible with all Toro 570 Series nozzles – including 570 MRP Plus, TVAN, Stream Bubblers and low trajectory nozzles • All bodies are shipped with a pre-installed flush cap for easy cleaning and sprinkler extraction • The collar allows for easy adjustment of the working angle during testing
Additional functions
• The small diameter collar, only 50 mm, is not very visible: this reduces damage from bulk or vandalism • Can be coupled with Maxijet® nozzles for micro-irrigation applications • Models with a check valve, equipped with a strong return spring to eliminate the problem of drainage at low pressures, retaining water in the pipe (optional) • Durable Cycolac construction • Stainless steel return spring
Technical specifications
• Sprinkler spacing: 0.6-5.5 m • Flow range: 0.2-17 l/m • Recommended operating pressure: 1.4-3.5 bar • Maximum pressure: 5.2 bar • ½" female threaded connection to the network • ½" female threaded side connection (for 6SI and 12SI versions) • The Check-O-Matic check valve (optional) maintains the pressure generated by a maximum height difference of 3 m.
Dimensions:
• Body diameter: • Collar diameter: 50 mm
